The ForkLift is one of Yakima's most versatile fork-mounted roof racks. It boasts square, round and direct-to-factory crossbar capability right out of the box. It also features quick and easy tool-free installation, a sleek design and a smooth, automotive finish that looks great on any car. The easy-to-adjust sliding wheel tray makes positioning the rear wheel a snap and it’s compatible with most disc brakes.
Go BigStack to go big! Mount up to 4 boats on your roof, or use that room for other gear for a multi-sport adventure. HullGuard padding keeps your boats safe and universal mounts fit nearly any shape crossbar. - Folds when not in use for better aerodynamics - Tool-free installation Fits Yakima round, square, factory, and aerodynamic bars - Top-of-the-line Hullguard padding keeps your boat protected during transport - SteelCore construction uses a steel tube frame for superior strength - Integrated ramp system makes it painless to load your boat - Includes Heavy-Duty Straps and Bow/Stern Tie-Downs Integrated bottle opener - SKS Locks sold separately - Minimum crossbar spreads of 24 inches\u001D or more
With an iron grip, Thule's Rapid Crossroad turns factory-installed raised rails into a versatile multipurpose rack system. The streamlined, seamless look is achieved with the aero Rapid aluminum load bar. But these aren't just sleek looking, the aero design cuts down on wind resistance and noise. Your car's rails are fully protected thanks to the integrated rubber lining. And you get maximum rack strength and a custom fit from the rubber-coated steel straps.
Yakima's vehicle-specific Q Clips are required to mount Yakima Q-Towers to your car. One end of the Q Clip attaches to the Tower and the other end attaches to your vehicle's door frame when you fasten your roof rack. Plus, they're coated to protect your vehicle's finish. Select the right model Q Clip for your vehicle using Yakima's rack configurator.
Thule's AeroBlade Load Bars are the strong, silent type. Using a sophisticated BoxBeam construction, they're some of the strongest load bars on the market with a capacity of up to 165 pounds. That's the strong, now for the silent: In addition to their wing-like shape, the AeroBlades sport a textured surface that greatly improves wind flow so you get drastically reduced noise and much better gas mileage. The bars are easy to use, too, thanks to Thule's SmartSlide sytem that makes installation hassle free and their SwingBlade technology that allows full access to the T-slot for easy accessory additions.
Step up to the completely new Yakima bar. Thoroughly wind tunnel tested, the black JetStream’s JetFlow design is exceptionally aerodynamic, incredibly strong, lightweight, and really quiet on the move. The root of a modern rack system, it carries a lot and looks good doing it. - Wind tunnel tested JetFlow™ teardrop shape is strong, quiet and exceptionally aerodynamic - Seamless extruded aluminum construction is light, strong and sleek - JetTruss™ internal support engineering adds serious strength - Materials and construction create a durable bar designed for years of use - T-slot with SmartFill™ push-down infill for easy mount attachment and efficient airflow - JetStream Black - powder-coated alloy finish and high-gloss polymer end caps - JetStream Silver - clear anodized alloy finish and high-gloss polymer end caps - Available in 3 sizes; SM (50”), MD (60”) and LG (70”)
The sleekest bike rack ever to rip down I-70. RockyMounts JetLine is a highly crafted fork mount with a low profile and streamlined aluminum head and tray, designed to fit Slotted Crossbars (RockyMounts Ouray, Thule AeroBlade, Yakima Whispbar and JetStream, Rhino Rack Vortex, factory bars from Audi, BMW, Mercedes, Mini, Volvo, VW), Thule Square Crossbars, and Yakima Round Crossbars. The JetLine will hold bikes with a quick-release front wheel and holds skinny road tires up to 2.7-inch mountain bike tires. The simple, long-throw quick-release function allows easy bike loading and unloading. JetLine is compatible with disc and standard brake systems. Lock rack to car and bike to rack with RockyMounts lock cores and keys (sold separately—requires a 2-pack).
Prioritizing the buffet of gear laid out on your living room floor can be a painstaking process. Should you take this? Will you need that? We have an easier solution: Throw the new Mini-Skinny on the roof and take all of it. With as much space as a comparable “fat” basket and 50-percent more usable crossbar space, you’ll be packing your gear, your friend’s gear and your friend’s dog’s gear. Half the width—Twice the fun. Offers fit options for the best of both worlds. Your worlds, whatever worlds they may be. Be it cycling, kayaking, or road tripping to the ski lodge. The Skinny’s distinct design provides the same load surface as other “fat” cargo racks while leaving 50% of usable crossbar space for, you know, whatever you need. -1 Bike Capacity (50lb bike, 9mm skewer) -Roof bar mounts come equipped with lock cores -Comes fully assembled -Matte Black Powder Finish -Fairing included with silver accents -Mounts to most factory & all aftermarket cross bars -1 Integrated bike mount with skewer -160 lb. capacity with bike & gear (always adhere to cross bars posted weight limits) -Max crossbar size-4.5” wide by 1.75” thick -2 piece design with option for Mini Skinny Extender to allow for more room -Two-Piece: 68” L x 23” W x 7” H
Thule's AeroBlade Edge is an integrated foot/load bar with a low-profile, aerodynamic design for vehicles with a factory roof rack. The AeroBlade bars use BoxBeam construction, making them some of the strongest load bars on the market with a capacity of up to 165 pounds. In addition to their wing-like shape, the AeroBlades sport a textured surface that greatly improves wind flow so you get drastically reduced noise and much better gas mileage. The feet fit your vehicle's roof rails without a fit kit and they're T-track compatible as well.
Yakima's CrossBars are a necessary component of your rack system. They attach to your towers and enable you to affix bike trays, ski carriers, rooftop boxes, etc. Strong and durable, they're made of vinyl coated steel and stand up to harsh weather.
Heavy-duty aluminum load bars with a unique tri-slot design for fitting of multiple accessories. - Flexible tri-slot design allows use of a range of load accessories independently or in combination - Upper and rear T-tracks are for fast installation/removal of accessories, lower T-track is for connection to roof - Check the Thule Buyer's Guide for your vehicle's recommended bar length - 175cm = 69-inch - 200cm = 79-inch
Be the envy of all the boaters at the river with the EvenKeel's ingenious and thrifty saddle-style rooftop rack. Universal mounts fit nearly any crossbar right out of the box. And out of the box it comes with everything you need to haul your boat, including straps and bow/stern tie-downs. Sold in a set of 4.
- Fits all Yakima crossbars except 86-inch - Sold in sets of 4
$63.00 - $126.00
Yakima's vehicle-specific Landing Pads are required to mount Yakima Control Towers to your car. One end of the Landing Pad attaches to the Tower and the other end attaches to your vehicle's factory track system. They also have rubber bottoms to protect your vehicle's finish. Select the right model Landing Pad for your vehicle using the Yakima fit configurator.
Thule's AeroBlade Edge (Flush Mount) is an integrated foot/load bar with a low-profile, aerodynamic design for vehicles without a factory rack. The AeroBlade bars use BoxBeam construction, making them some of the strongest load bars on the market with a capacity of up to 165 pounds. In addition to their wing-like shape, the AeroBlades sport a textured surface that greatly improves wind flow so you get drastically reduced noise and much better gas mileage. These flush-mount feet will need a fit kit for your specific vehicle (sold separately).
This standard J-style cradle delivers superior carrying performance and protection with its 4-touchpoint adjustable padding and rust resistant steel design. - Steel design with adjustable padding for carrying strength and kayak protection - Quick on/off hardware ensures fast installation and removal - Wide mouth J-profile offers easier loading and unloading - Optimally sized J-style carrier leaves roof space for other Thule accessories - AllSurface rust-resistant coating and hardware for longer product life - Carries 1 kayak and requires 1 person to load and unload - 1 to 4 carriers per vehicle - Includes all straps to transport 1 kayak - Accommodates kayaks up to 36” wide and 75 lbs - Requires Thule rack systems crossbars, round bars or factory racks (sold separately) - Primary watercraft: Kayak
Maximize your kayak carrying ability with The stacker. It can hold up to 4 kayaks stacked on their side taking up the least amount of roof space. - Fold-down steel design with non-scratch outer coating - Quick on/off hardware ensures fast installation and removal - Optimally sized carrier leaves roof space for other Thule accessories - Carries up to 4 kayaks and requires 1 to 2 people to load and unload them - Includes straps to transport 2 kayaks - 1 to 4 carriers per vehicle - Accommodates kayaks up to 36” wide and 75 lbs - Requires Thule rack systems crossbars, round bars or factory racks (sold separately) - Primary watercraft: Kayak
The perfect combination of form and function, the Vagabond X increases your vehicle’s load capacity by a staggering 160 pounds – and that can include up to two bikes with 9mm skewers. With locking mounts, two 9mm skewers and the capacity to accommodate even larger loads with the Xtender, this Vagabond pulls its weight and more. Includes all the functionality of the Vagabond to get your bikes and gear on the road with ease, and we dare you to find a better-looking roof basket on the market. A bit showier than the original, the Vagabond X features locking mounts. - Locking mounts provided - 2 integrated 9mm front skewer mounts - 160lb Load capacity - 2 Bike - 50 lb max for each - Silver decals on front and side - Ability to add an extension (Xtender) making the rack 73" long - 41" x 52" x 7" - Mounts to most factory and aftermarket roof bars
- Securely carries both road and mountain bikes QR and thru-axles - Includes interchangeable inserts for QR axles (9mm) and thru axles (12mm, 15x100, 15x110) - Fat Bike compatible with optional accessory (Sold separately) - No frame contact means no damage to carbon fiber and custom paint jobs - Optional SKS locking package secures mount to vehicle, bike to mount (sold separately) - 1 bike, 40lbs capacity
No matter where you go, Yakima's Raptor Aero keeps your bike securely in place. It's especially convenient because no bike disassembly is required. You'll love this if you have bolt-on or hard-to-remove wheels. Plus, the Raptor's padded jaws hold most bicycles tight yet won't scratch the paint. The Raptor comes with two ratcheting wheel straps and fits most crossbars right out of the box.
RockyMount's Brass Knuckles rack gets your bike from point A to point B with the minimum of hassle and the maximum of security. The aluminum arm uses finely indexed ratcheting to hold front bike wheels from 20- to 29-inches with widths from skinny road tires to fat DH monsters. Form-fitting mounting hardware plays nicely with almost any roof-mounted bars: round, square, or aero. When your bike isn't on the roof, the arm folds down for an extremely low profile for minimal wind noise and maximum gas mileage. For extra security, you can lock the bike to the rack and the rack to your car with lock cores (sold separately).
Thule's XK3 Xsporter Rack Adapter makes your Toyota Tacoma compatible with Thule's revolutionary Xsporter truck bed rack system (sold separately).
On your next roadtrip, free up a little space inside your car with Thule's Interstate rooftop cargo bag. This soft-sided, weather-resistant rooftop accessory is spacious enough to carry your entire family's vacation gear, and tough enough to protect it out there on the open road. The double-coated laminate material is rugged and the padded base protects your car's finish. Heavy-duty, double-stitched straps attach the cargo bag to your roof-rack crossbars or raised factory rails. Twin compression straps keep the load stable, minimize abrasion and noise, and improve aerodynamics. When you've gotten back home the Interstate folds down for compact storage.
Versatile water sport carrier that can transport either kayaks or stand-up paddle boards with one system. Features - Multiple ways to carry: Single kayak in J-style or saddle configuration, two kayaks in stacker mode and up to two SUPs in saddle mode - Maximum protection of kayaks and stand-up paddle boards thanks to the thick rubber saddles and padded upright - Easily manage load straps while strapping down the kayaks using the integrated StrapCatch (two sets of load straps with BuckleBumpers and bow and stern tie downs included) - Quickly folds down flat when not in use for better aerodynamics - Fits all rack systems with the universal mounting hardware and quick to install with no tools required - Accommodates kayaks up to 36" wide and a maximum kayak weight of 130 lbs Technical specifications - Load capacity: 130 lb - Dimensions: 32 x 7 x 19 in - Weight: 20 lb - Rubber cover for strap buckle - Length of straps: 2x15' Fits the following Thule crossbars: - WingBar Evo - AeroBlade Edge - AeroBlade - SquareBar - ProBar
A versatile, horizontal kayak carrier with large cushioned, flexible pads that conform to a large range of hull shapes as well as SUPs. - Protects the hull with large, flexible, cushioned pads - Fits a variety of Thule rack systems, round bars and most factory racks due to T-Track and FlipFit brackets - Accommodates kayaks and SUPs up to 36 in/90 cm wide and 85 lbs/40 kg - Easily secure the kayak or SUP using the center load straps with car-protective buckle bumpers and QuickDraw bow and stern tie-downs - Can carry a variety of hull shapes as well as SUPs with two independent pivoting saddles with angle-setting lever
The RockyMounts Tomahawk low-profile upright mount that's easy to use and even easier on your wallet. Fat-bike ready out of the box (up to 5" tires), and will hold all styles of bikes, road, mountain, cruiser, and childrens (20 - 29" wheels). Features: - No bike frame contact - simply ratchet the hook over the front wheel and secure the front/rear wheelstraps - Fat bike ready (up to 5" tires) out of the box. Includes two wheel strap extensions - Swingarm easily adjusts for driver side and passenger side installation - Mounts to all styles of crossbars - round, square, factory, aero - Holds all styles of bikes, 20 - 29" wheels (except those with front fenders) - New Easy-Load wheel straps make loading bikes easier than ever - Optional 2-pack locks (sold separately) lock rack to car and bike to rack
Getting your gear onto your rack isnt complete until youve secured it. This pair of super strong box-stitched 16 straps include soft, rubber-coated buckles to protect your boats and gear from scratches.
Loading your boat has never been easier than this! Two front and two rear saddles with integrated rollers will have you and your friends on the water in no time. The spring-loaded base automatically adjusts to boat when loading. - Mounts to any bar type without tools, making installation a cinch. easy loading Fully assembled out of the box - Tool-free installation Fits Yakima round, square, factory and aerodynamic bars Spring-loaded base automatically adjusts to boat when loading - Smooth molded pad hugs and protects multiple boat types - Tilting paddle technology to accommodate an array of boats and roof rack systems - Includes Heavy-Duty Straps and Bow/Stern Tie-Downs - SKS Locks sold separately - Supports one boat up to 80 lbs Minimum crossbar spreads of 24\u001D or more
Make carrying your boat highway safe with these bow/stern tie downs. Forget about tying knots, these tie downs feature handy ratchet pulleys that are easy to use and are corrosion resistant. Theyre also great for securing non-nautical loads like ladders or lumber. - Secures the bow and stern of any boat - Best in class corrosion resistance - Clear plastic tubes protect your vehicle from damage
RockyMounts' TieRod is a fantastically simple and elegant option for attaching a fork mount roof rack to your vehicle's factory crossbars. Not only will you be impressed with its easy, secure operation, you'll be thrilled with how well the rubber coated stainless steel straps perfectly hug the roof racks on your car. Plus, with RockyMounts locks (sold separately) you can lock the rack to your vehicle and your bike to the rack.
Page 1 of 2 Next page